Skip to content
Wall mounting

TV wall mounting done right

TV wall mounting in Albuquerque. Lag bolts into studs, the right mount, and a safe, level install.

A TV on the wall looks great until it comes down. Most bad installs fail for the same few reasons: the bolts missed the stud, the wrong anchors were used, or a full-motion arm was hung on drywall alone. Here's how a TV should be mounted, and why it's worth having it done right.

What I handle

  • Finding and confirming stud centers
  • Matching the mount to the TV's VESA pattern and weight
  • Lag bolts into wood studs, or masonry anchors in brick and block
  • Level, centered and at the right viewing height
  • Surface cord covers for a clean look
  • Final load and wobble check

Why the studs matter

Drywall is just pressed gypsum. It crumbles under a constant pull. Consumer Reports recommends lag-bolting a mount into the vertical studs behind the wall, or into masonry, for the most secure installation. Mount manufacturers commonly require that the wall can support five times the combined weight of the TV and mount.

How lag bolts go into studs

  • Find both edges of the stud and mark the center. Edge-to-edge finding is more reliable than a single beep.
  • Level the wall plate and mark the holes on the stud centerline.
  • Drill a pilot hole of the size and depth the mount calls for.
  • Drive the lag bolt with a socket until the washer is snug against the plate. Over-tightening strips the wood.
  • Use at least two studs when the mount allows it.

Types of anchor points

  • Wood studs: lag bolts driven into the center of the stud. This is the strongest hold in most Albuquerque homes.
  • Metal studs: special toggle-style anchors made for steel studs. Regular lag bolts won't hold.
  • Hollow drywall: snap toggles and toggle bolts for lighter, flush items like shelves and mirrors. Not for full-motion arms.
  • Plastic expansion anchors: only for light items. Never for TVs, heavy mirrors or anything that moves.
  • Brick, block and concrete: sleeve or wedge anchors drilled into solid masonry. Never into the mortar joints.
  • Plaster and lath: needs extra care to find framing and avoid cracking.

Fixed, tilting and full-motion mounts

  • Fixed: sits closest to the wall and puts the least strain on the anchors.
  • Tilting: angles down for mounting higher, like over a fireplace.
  • Full-motion: pulls out and swivels. The arm works like a lever and multiplies the pull on the top bolts, so it needs solid stud or masonry anchoring.

Dangers of a bad mount

According to the U.S. Consumer Product Safety Commission, tip-over incidents involving TVs, furniture and appliances send about 17,800 people to emergency rooms each year. Of the 217 tip-over deaths CPSC reviewed from 2013 through July 2023, 47 percent involved a television, and children make up most of the victims. A properly anchored TV, on the wall or strapped to its stand, removes much of that risk.

  • TV falling and injuring someone, especially kids
  • Mount pulling out of drywall and damaging the wall
  • Cracked screens from a sagging or twisted mount
  • Hitting wires or pipes by drilling in the wrong spot

Why pick a pro

  • The right tools: stud finder, level, drill, socket set and ladders
  • Knowing which anchor fits your wall type
  • Two sets of hands for big screens
  • It's done once, level, and it stays up

What about the cords?

I hide cables using surface cord covers painted or matched to the wall. Adding an outlet behind the TV or running power inside the wall is electrical work for a licensed electrician.

How it works

  1. 01Call, text, or send a photo of what you need.
  2. 02I show up at your home with the tools.
  3. 03I look it over and tell you straight what it needs.
  4. 04You decide, and I get it done.

Common questions

Can a TV be mounted on drywall without studs?
Small, light TVs on fixed mounts can sometimes use heavy-duty toggle anchors rated for the load, but most mount makers say not to install into drywall alone. Full-motion mounts should always go into studs or masonry.
Can you mount on brick or a fireplace?
Yes, with masonry anchors drilled into the solid brick or block, never the mortar joints.
Do you supply the mount?
You can buy your own, or I can recommend one that matches your TV's VESA pattern, weight and wall type.

I mount things on existing walls. I don't do framing, drywall replacement, or in-wall electrical outlets, which need a licensed electrician.

At your home in Albuquerque, Rio Rancho, North Valley, South Valley, Corrales and nearby areas by request.

Also searched as: TV mounting Albuquerque · TV installation · mount TV on wall · TV wall mount service · Albuquerque, NM

Sources

Need something mounted?

Call, text, or send a photo. No job too small.